Master CP Ready to Bind – http://bit.ly/Tf4cbf
Master Cp Ready to FLY – http://bit.ly/VDZxhI
The Walkera Master CP is a 200 sized flybar-less collective pitch helicopter suitable for outdoor and indoor flight. It is a great transition model for pilots who have experience with co-axial rotor helicopters and wish to advance their skills. The Master CP has key features that are beneficial to novice pilots. The 6-Axis Gyro helps stabilize the helicopter in different flying situations including mild 3D aerobatics. The 6 Axis gyro plays an important part of maintaining flight stability correcting drift about all axis of movement. It is much more effective in maintaining flight control throughout all methods of flying. The elastic composite parts found in the rotor heads, body frame, and landing Skids absorb damage during crashes resulting in less chances of parts breakage. Plastic composite weighs less and is more elastic than metal which benefits the power to weight ratio on this helicopter. The main blades are a mix of carbon fiber that greatly enhances structural toughness and rigidity. The tail motor is protected in plastic and allows for quick change if needed. The Master CP is finished with an elegant canopy constructed of pvc to provide tough and durable performance.
The Walkera Master CP helicopter board system has the capability to update its firmware online. What you need is the Walkera Adapter UP02. So you can update the fimware from the Walkera website from time to time.
){kind=link}
That is a complete and total LIE! A Walkera Master CP DOES NOT FLY LIKE
THAT out of the box. BEFORE you buy one, try to contact their technical
support. I have been flying for about a year now, and I have a Blade 200srx
that flies 10x better than the Walkera. The blades may be durable as
depicted in this video, but if you use the settings in the manual with a
Devo 7e, it will strip your servos on the first attempt at flying and cause
$100 worth of damage just for taking it out of the box and trying to turn
it on. I will never ever waste my my money on another Walkera, I have
three, and it is the same story with all three, I bought this one because I
fell for the lies. I will do everything in my power to ensure no one throws
$300 away on a Walkera, they actually laugh at us stupid Americans for
throwing money at them.
I bought one of these but it seems to be stuck in flight (stunt) mode? Not
sure but when i try to take off, it topples over and wrecks the blade, the
trimming is all even and i don’t know whats wrong with it! HELP!
To prove my point, I will scan the instructions and post them here as soon
as I have a chance, just to show everyone how stupid and worthless this
helicopter really is, It is a waste of time and money, spend your money on
an E-flite, but they are all made in china and they are engineered to
break, unless you spend hundreds of dollars on the aluminum upgrades and
never have a hard landing because of wind
кто знает сколько заряжается Квадрокоптер mini DRONE 4см 2.4Ghz 4CH,
белый,
ราคาเท่าไร
Not for a beginner!
Blade and Align are higher quality brands.
this seems like a good rc helicopter, im stepping up from a 4 ch to a 6,
but i also want it to be able to hold a go pro, will this?
can someone help me setup devo7 with super cp
How long can it fly
WOW!
The 6 axis doesn’t seem to be working on my master cp. When I got it I set
it on the table and bound it to my devo 7e and after it bound when I picked
it up you could hear the servos making noise trying to level itself out. It
stopped doing that and I’ve only flown it about 15 times. Anyone have this
problem and/or a suggestion? It still flies just fine it not self leveling.
I have a questing. I got a master cp like that one, but it does not want to
spool up the blades. Servos work just fine, but neither main rotor nor the
tail spools up. Any idea whats wrong? ESC dead? The heli is brand new.
Shame you have to buy metal gear servos for this as the ones supplied strip
their gears at the slightest crash or bump. Speaking from experience
The 6 axis gyro means that it will level itself when the cyclic stick is
released?
Can this be turned off so it behaves like a regular 3 axis gyro?
Ohh my god, I’m still trying to fly my Blade CX2, this,looks a lot more
advanced.
Hello friend, I am beginner, could you possibly tell me I must 7E a setting
for the Master CP – Walkera. Would you like to configuration so that the
helicopter is more stable, less sensitive to comondos.
Would you assist me?
I HAVE 1 ON THA WAY, AND I WAS WONDERING IF IT IS SUITABLE 4 EXPERIENCED
COAXIAL FLYERS? I GOT TO BUY THIS FINALLY! I HAVE A WALKERA GENIUS CP IT
WORKED OUT FINE 4 ME!
Brilliant review, learned a lot, going to buy one today. You fly amazing,
brilliant control, I can fly well but dont try inverted. thanks for video
that heli is AWESOME !!!!! HEY GUYS NEED A LITTLE ADVICE ,, I picked up
a crappy 2 channel heli got practice with that then just yesterday I
picked up a very nice 3 channel heli so much fun and already starting to
master that flying in tight spots in the house and hovering is easy now
I’m looking into a 6 channel or do u guys think I should get a 4 channel
first then the 6 channel
Thanks
I miss tony 🙁 This tony :(
Why would you recommend a 3D helicopter to a beginner. Stop just trying to
get sales. This is an advanced copter and you need either someone to teach
you to fly it or practice on a trainer copter.
hi mate,,, just wondering if you can give me some tips about this heli,, as
this is my number 3 master cp walkera and i have not be able to fly yet no
even to take off once
I HAVE A DEVO 7 ( DEVENTION) ORIGINAL RC… look think you are soo good and
hopefully you can help me,, i will be generous in buying heli and spart
parts from you..
1.– i have not be ble to take off yet why the helicopter stays in ground
with full throttle up ( full revolution of blades ) does not take off..
and sometimes goes for one side and blades hiting the ground badly…why s
that? i checked the setting and seems to be ok unless i am setting it up
wrongly ,,what setting should i check and where to adjust according to your
experience ?
2.- i am only trying to fly in a normal mode .. ( NO 3D FLY) WHERE SHOULD
I MAKE SURE THE BOTTON IS IN THE RIGHT POSITION? IS THE RIGHT TOP THAT
NEEDS TO BE ALL THE WAY BACK?
ITS BEEN A big frustration for me if you could help me with theses tips
maybe my problem is solve,, at least wanna be able to fly as a normal
heli,, i have expericnce flying 4 channel,,,,, i know is different but it
cant be soo dificult if i could make it just to take off would be
fantastic
i see your video taking off soooo smooth and nice … sorry for my long
comment but i woud like to get help mate…
i appreciated taking your time to make this video is great ,,thanks for
your help..
regards
javier
Excellent video!
I know price my vary but what kind of price range are we looking at for the
heli
is this available in philippines
Your video is really nice , and helicopter is very beautiful ,but where you
can find this helicopter?
is master cp flyable with transmitters other then walkera(devo) transmitter
any other like(flysky)….
can you give me settings for the Devo 7 so I can fly this almost like a 4
channel helicopter and Im just not ready to roll or loop yet…
what is the difference between the ready to fly and ready to bind? the
prices are way different from eachother.
This is gonna be awesome ….when I get this and not tell my buddy that
just got a new 4 channel and I’m gonna flip over his lil copter! Haaaaa
He needs to slow down when he’s talking. He’s hard to understand.
you say brushed you guys should left that behind and use brushless i use to
have an a walkera 66 upgraded to brushless and i cant complaint about it
but while was brushed it was a pile of bull u know what .
ok just stop talking
VERY GOOD REVIEW BRILLIANT
How much is that ?
What exactly are you smelling Tony? I hear you saying “Whiff” when you
should be saying “With.”
How much +Global Box Shipments
Nice!
Great video and outstanding 200 Class walkera’s project. Congratulations
Tony, once more, to your pretty good review !
i think ive bought more stuff from xheli because of tony’s reviews than i
can shake a stick at.. LOL
Just ordered mine! Thanks for the video! I’ve been thinking for a while
about going to a 6ch and this video made my decision for me. Thanks again!
I recently bought the master cp. can anyone tell how to set to beginner on
the transmitter. Thanks.
Can anybody explain how the 6 axis gyro would differ from something like
AS3X?
amazing!
i think walkera products suck. cheap. complicated lousy instructions and
don’t work.