In this video I show you how to drop a BZM 28.5 Torque Tuned engine in an FG Sportsline 2WD. I’ve converted my Sportsline chassis to a 1970’s Dodge Challenger, with lots of custom parts. In the video series you will be able to follow this build from the very start, to the point where it will finally start burning some rubber!
I need some sick power in this ride, that is why I opted for a different powerplant. Although reliable and sufficient, the stock Zenoah G230RC 23cc engine does not offer me the massive power that I feel matches the true muscle car spirit. That is why I am swapping it out with a BZM Micro 28.5cc tuned engine. BZM is originally known for their pocketbike and gokart engines, and have more recently started to produce a wide variety of products for the largescale RC market.
The BZM is an engine that is developed from the ground up using only the best of components, billet machined cylinder and cylinderhead, lightened piston, oversized bearings, Nikasil cylinder lining and a full carbon engine cover are only a few of the unique featured an these reed inducted engines.
For more information about BZM Micro engines, and the full range of additional products and gear, check out the following link:
http://bzm-micro.com/
For more information about the FG Sportsline, visit the FG Modellsport webstore:
https://www.fg-onlineshop.de/
When you install your electronics in your gas powered car, always remember to use a killswitch. Killer RC has a great range of products that assist you in interrupting the ignition of the car and turning the engine off in case of emergency. Safety first, for yourself and those around you.
For more information about the Killer RC products used on this build, visit their website:
http://www.killerrc.com/
For more information about HemiStorm Products feel free to join us on FaceBook:
https://www.facebook.com/home.php#!/pages/HemiStorm-Products/236585496380241
To visit the HemiStorm website and have a look at the products we develop for largescale RC cars, click the following link:
http://www.hemistorm.com/
Music:
“Reflections On The Metro Line” by Switchbladedisco
http://dig.ccmixter.org/dig?user=switchbladedisco
Licensed under a Creative Commons license:
http://creativecommons.org/licenses/by/2.5/
Intro music purchased at Productiontrax.com
License Option B: Commercial, for-profit, distribution, or broadcast, all Packages, and Photos
){kind=link}
where did you buy it
Yo my dumb computer won’t load the video
Could you
Make me cover?
Where can I buy a rc car
Myn cost 16 mill
Sick rod,any problems with the bzm yet?
could you send a link
hello my friend, how do I find this body of dodge it and very beautiful, I
thank and congratulate the videos !!!!
where did you by it
Cool
How much did the rc car costs
Awesome video Chris thank you!! Nice to know that one day when I can
purchase a FG Sportsline I can put a BZM motor inside! Great Motors!!
My own one cost 1mil
this must have cost thousands!
10 seconds into this and I liked it already :)
Hey vriend, dat past en werkt perfect, ik hoor veel goeds over Samba!
How much would you charge for a rustler body?
Nice vid. Can’t wait for running vid.
It’s a good idea and I’ve seen some people doing it in there scratch
builds. But to replace it with a stock engine could be tricky, It’s quite
large and has a different type of carburetor. It will also have a lower RPM
rating than most other Gasoline engines designed for RC cars and trucks.
Glad to read that I’m making a bit of progress! Still figuring out all the
stuff my camera can do, it boggles me at times. Have fun at RCX bud, wish I
was there with you!
wow congrats u are very talented..i have a question where did u got the
body? thanx
Sick paint bro sick
She’s coming alng very nicely man!! LOVE the new engine!! I really can’t
wait to see her do some burn-outs! Take care my friend! :~)
Very much appreciated, thank you for dropping by and watching!
can u please make a video on how to brake in the metor i got a new motor
and i dont know how to barke it in
Both a running video, and a vid about the wheelie bar are in the playlist.
Glad you enjoy them! 🙂
drive it !
fuck me y tought it was a real car :))
awesome work man
I know!! I was actually thinking the same thing! The carbon looks great,
but when you took it off… wow! You’ll make the right decision! But
something to keep in mind… is the cover needed to direct air flow? Caus
if it is, you’ll be needing to keep it on! :~) Cheers man!
Hi rcaddict97! What I can do, on a short notice, is show you how I will
paint up my own Raptor. I’m overhauling one of my HPI Blitzes and it is
getting a Raptor body to finish it off. 🙂
Yet another great video from Hemi awesome job man! Can’t wait to see the
burnout lol
have you ever thinked to put minimoto engine to rc… is it even possible
?just thinking
Dankjewel, groeten terug!
I get my bodies from the FG website. I have no experience with the
Bergonzini cars, but I have read a lot about them and a fair bit seems to
be universal to these type of cars. Thank you fro stopping by and leaving a
comment!
Oke! Het is een RCMK 290f carter geworden met 26cc 4 bouts cilinder.. en
die word aangepast 🙂 ik zou zeggen abonneer op mijn kanaal kan je het zien
als hij af is
Ok that is great. I haven’t been in this hobby for very long (4-5 months)
and I’m really enjoying. I was wanting to get a ford raptor body done by u
so that when I race at my local track, I have an amazing body to show off
High five, Johnny!
Nice to see you stop by once more, Pat. Have a great weekend!
Very professional! Awesome job both with the build and with every aspect of
the video. Thumbs up!
I’m so eager to see if I need to scrape the burned residue from the outside
of the shell, it will be interesting to take it out. 🙂
kan jij ook en body voor mij maken voor een traxxas slash 4×4 en hoe duur
zou at dan zijn?
looks pretty fast i mean
A true MASTER RCer to say the lease. You and DjMedic are the two most
innovative hobbyist I have seen to date. Great work. Waiting for the next
video.
lekker bezig!!
Will you change the exhaust for a tuned one?
dang thats baby gunna have some wheel standing rubber burning street
blazing torque my friend. your dragster is an inspiration. been muttling
idea’s of building a 1/5 scale xtreme hillclimb beast. am in process of
doing such with my nitro savage once i find a certain hex adapter for my
custom wheel selection. great video!! awesome engine choice. 8hp thats alot
of torque. looking forward to the burnout and especially a few mock 1/4
mile or 1/8th mile passes.
muy bonito motor
i subscribed you would you please subscribe me and nice videos keep it up
Thanks Abdullah, glad you like it!